MG-Cars.net

Welcome to our resource for MG Car Information.

Recommendations

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG MGA - Twin Cam cooling air exit

Our pushrod MGAs have some cooling problems, most seem to be related to getting the air out of the engine compartment rather than in. The Twin Cam had special louvered panels at the bottom of the wheel wells, mostly for engine access. Perhaps the louvered panels could be installed in a pushrod A to help air exit the engine compartment? I don't find the part in the Moss catalog, any ideas on where to source it?
Russ
Russ Carnes

Russ,

The louvered panels for the Twin Cam wheel wells are made by Kilmartin in Australia. These are correctly made with the louvres pressed from both sides. Some reproductions only have the louvres pressed from one side and are unsatisfactory.
Kilmartin should have agents in the USA. Send them an email.

http://www.kas-kilmartin.com.au/


Mick
M F Anderson

This thread was discussed on 03/03/2010

MG MGA index

This thread is from the archive. The Live MG MGA BBS is active now.