MG-Cars.net

Welcome to our resource for MG Car Information.

Recommendations

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG MGA - Vernier Cam pulleys

Anyone got any recent experience good or bad? Who makes the best? What sort of difference do they make? Are there any belt driven versions?
Geoff
Geoff McGladdery

Geoff,
If you’re using a standard cam, then there is no point as there not any lighter and the performance advantage is very minimal.
However for performance cams then a must, as they have been ground slightly offset.
You can get offset key's for a few £'s, but it is possible to break these if you flat change, etc.
The one's I have in two engines are from moss or Kent cams.
It does take a good hour to set them up though.
Never seen a belt version. Small chains don't stretch that much anyway.
Hope this helps.
<MARK>
Mark Hester

This thread was discussed on 11/04/2006

MG MGA index

This thread is from the archive. The Live MG MGA BBS is active now.