MG-Cars.com
MG MGA Wanted: 3 bearing 1800 front and rear plates BBS discussion at MG-Cars.net
MG-Cars.net
Welcome to our resource for MG Car Information.
Recommendations
Parts
MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.
|
|
MG MGA - Wanted: 3 bearing 1800 front and rear plates
| Does anyone have a good set of front and rear engine plates for an early (3 bearing) 1800 engine they can sell me? Any leads will be appreciated! Thanks! Frank Nocera (flnocera@aol.com) |
| Frank Nocera |
| Frank. Answered this on the B Tech BBS with telephone number and e-mail address. Les |
| Les Bengtson |
| Frank If this is for putting in an MGA you are better off with a 1500/1600 front plate. On the 1800 front plate the engine bearer holes are in a different position. Steve |
| Steve Gyles |
This thread was discussed between 08/06/2006 and 09/06/2006
MG MGA index
This thread is from the archive. The Live MG MGA BBS is active now.