Welcome to our resource for MG Car Information.
|
MG MGA - Wire Harness route to headlights
Is there a picture somewhere showing how the wires in that front harness are routed to the lights? I need a visual if possible to help get this going. Thanks, Harley |
Harley Johansen |
Harley I will start the ball rolling and let others advise on any 'original' changes that may be required. The front loom wiring goes forward alongside the right hand inner wing. On mine it is attached to the inner wing out of sight behind the heater trunking. At the front cross member one branch goes down underneath the inner wing and up inside the outer wing to the headlight and sidelight/flasher (bottom 2 photos). The other branch of the loom attaches to a P clip (top right photo), across the member (in front of the bonnet latch strut) to a P clip on the left side (top left photo), then down to the lights as per right hand side. Please ignore my red auxiliary cable and muck on the inner wings due to salt and wet roads - proof I use the car in winter!. As I said, starter for 10. Others can come forward with variations. Steve |
Steve Gyles |
This thread was discussed on 17/12/2010
MG MGA index
This thread is from the archive. The Live MG MGA BBS is active now.