Welcome to our resource for MG Car Information.
|
MG MGB Technical - Basic Wiring
Hey all, This isn't MGB specific but could apply. I'm working on a Capri race car to compliment my BGT street car. I'm looking to do a basic race car style wiring job on my project capri. I want to run a master battery cut off switch, ignition toggle switch and push button starter. I would loved to have used the original harness but the previous owner destroyed it pretty well (lots of wire nuts etc..) The motor is a basic coil and points type ignition, nothing fancy. I know the basic wiring schematic but am unsure if and where I should be sticking fuses and what size wire I should be running for things. If anyone has a good drawing or schematic they could show me and/or wire size recommendations I would be in your debt. cheers, -Bill |
Bill Mertz |
Will your race car have or require lights, wipers or any other electrical devices? Here is a link with the information you may need but no wiring diagrams. http://home.clear.net.nz/pages/phil.bradshaw/car_wiring.htm This book has a basic wiring diagram for race cars. http://www.amazon.com/Automotive-Electrical-Handbook-HP-387/dp/0895862387 Hope this helps. Clifton |
Clifton Gordon |
Clifton, I will be running brake lights and probably an electric fan, probably no wipers or headlights for the time being. I was thinking of running a separate fuse panel for accessories (lights, fan, wipers) and have the ignition stuff separate. I'll check out the web site, thanks for the link. -Bill |
Bill Mertz |
This thread was discussed on 05/01/2009
MG MGB Technical index
This thread is from the archive. The Live MG MGB Technical BBS is active now.