Welcome to our resource for MG Car Information.
MG MGB Technical - bolt/thread size on fuel pump cover
|On a rubber bumper B, what is the size/thread of the two bolts that thread into the captive nuts in the trunk to hold the fuel pump protective cover in place?|
|It has been some time since dealing with late model pump mounting, but I would guess that it is a 10-32 or possibly a 1/4 - 28 SAE thread. Cheers - Dave|
|The factory screw is 1/4"-28 with an untreaded portion on the tip measuring about .150" long for the screw to pilot on the hole with.|
This thread was discussed on 12/06/2006
MG MGB Technical index
This thread is from the archive. The Live MG MGB Technical BBS is active now.