Welcome to our resource for MG Car Information.
MG MGB Technical - Brake Master Cylinder
|Folks: I have a MGB-GT '74.5. Need to replace, rebuild my Brake master cylinder. First I need to get the other one out. Do I have to take all the braces out to get it out? Ideas?|
|John - You should be able to take out the rubber plug under the dash to gain access to the master cylinder with a socket on an extension. you will need fingers articulated in about 6 places to get a wrench (box or open end) on the nut on the other side of the cylinder flange. While you have the master cylinder out, put heil coils in the flange to match the mounting bolts and it will make the job of reinstalling the cylinder much less frustrating. Good luck - Dave|
This thread was discussed between 05/03/2005 and 06/03/2005
MG MGB Technical index
This thread is from the archive. The Live MG MGB Technical BBS is active now.