Welcome to our resource for MG Car Information.
|
MG MGB Technical - Brake Master Cylinder Reassembly Question
After reassembling the master cylinder (72 MGB), I need to double check that some washers are correctly placed. Images one and two point to the washers in question. http://www.corygarant.com/mgb1.JPG http://www.corygarant.com/mgb2.JPG http://www.corygarant.com/mgb3.JPG Thanks for any help. - cg - |
cg |
Cory, the washer (or seal) in the first picture is correct, the washer in the second picture is not. The large seal behind the white guide bearing should have its open end facing the fluid. Rufus |
R Pool |
This thread was discussed on 20/03/2004
MG MGB Technical index
This thread is from the archive. The Live MG MGB Technical BBS is active now.