Welcome to our resource for MG Car Information.
|
MG MGB Technical - brake servo
I have a 78 b with a servo problem. When I purchased the car, the servo didn't work right. the pedal would go nearly to the floor before the brakes applied and then it was a hard braking action. I was also loosing brake fluid into the servo body. I plugged the vacumn hose from the manifold to the servo and I have brakes, but I would like the servo working again. My question is, do I replace the entire servo unit or does the rebuild kit offered by Moss or VB do the job? |
J W Hopkins |
It sounds like the master cylinder is leaking -- the servo is sucking brake fluid out of the MC because the seals are bad. If the servo is bad also take a look at this website. Has instructions for rebuilding a TR6 servo which is very similar to the B's. http://www.buckeyetriumphs.org/technical/Brakes/Servo/Servo.htm |
Ronald |
This thread was discussed between 23/01/2004 and 25/01/2004
MG MGB Technical index
This thread is from the archive. The Live MG MGB Technical BBS is active now.