Welcome to our resource for MG Car Information.
|
MG MGB Technical - Clutch Pedal Adjustment?
The clutch pedal in my '80 B "grabs high." Is there a way to adjust where, in the pedal range, it "grabs?" |
CRH Hoebel |
The clutch is hydraulic, so there is no real adjustment. What will effect the release or grab point is wear in the clevis pins. A total of three areas, at the pedal pivot its self, at the master cylinder, and at the slave cylinder. It only takes a bit of wear in all three to make a noticeable differance in the pedal. The other problem would be air in the system. HTH Ron |
Ron Smith |
Hi. A badly worn clutch plate will tend to give this symptom. Don |
Don |
This thread was discussed on 02/09/2005
MG MGB Technical index
This thread is from the archive. The Live MG MGB Technical BBS is active now.