MG-Cars.net

Welcome to our resource for MG Car Information.

Recommendations

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG MGB Technical - Dashboard Wiring

How does the wiring loom snake its way behind the dashboard on a 1980 RB Fed Spec.

For example does it go above the air vents or below.

Does it feed thru the hole in the metal brace or strengthener which is virtually center to the speedo and tach dials, ie behind the steering wheel.

My guess is that it snakes low, uses a metal tag to rest its weight on, which is two thirds across, welded to the bulkhead, then goes thru this big hole, rather than simply lying on this metal piece.

If anyone can throw some light on this, I would be most grateful, even more grateful if i were to be sent some pics or pointed to somewhere on the web where I might view.
Jack

From memory, mine is taped to the bracing bar which runs across the lower dash, or behind it I should say.

From memory so needs someone else to confirm
Bill

This thread was discussed between 24/06/2003 and 26/06/2003

MG MGB Technical index

This thread is from the archive. The Live MG MGB Technical BBS is active now.