MG-Cars.net

Welcome to our resource for MG Car Information.

Recommendations

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG MGB Technical - Front Valance & LE Air Dam.

Can anyone explain how the front steel valance and the plastic air dam, on an mgb roadster LE fix on the body.

Valance was cut off, so new one ordered, and air dam was lying on floor, so have no idea of sequence, screws etc.

Parts books provide no guidance, and Leslie Porter says nothing.
Tom

Tom,

See this months MGOC Comic. Roger Parker writes about these. You could contact him on 01954-234003

Regards

Peter
Peter Hills

Bolt the valance on the car. You might want to have it painted first. Position the spoiler on the valance lining up the large square holes and install stainless pan head sheet metal screws. You can use machine screws & nuts but the job becomes much more difficult.
Jim

Thanks Peter and Jim.

I presume that the valance does not come pre-drilled for the air dam, and that I have to manually fit it to the valance, is that correct.

Tom

Does anyone have this months 'MGOC Comic' online, or can they explain what it says.

Perhaps Roger can help.
Jack

This thread was discussed between 30/09/2002 and 01/10/2002

MG MGB Technical index

This thread is from the archive. The Live MG MGB Technical BBS is active now.