Welcome to our resource for MG Car Information.
|
MG MGB Technical - half shafts/ removing them
hi ive read in my manual i will need a special tool to remove the halfshafts on my 1977 mgb roadster(making a clonking noise and feels rough when turned by hand),can you get away with out one ,if not any idea how much they are.regards richard |
r a pinfield |
Its a slide hammer. Some people use an old brake drum. I think you put it on "inside out" there is a lot in that archives. |
S Best |
Frosts sell them for about £20 should be available from Halfords. |
Paul |
This thread was discussed on 21/08/2005
MG MGB Technical index
This thread is from the archive. The Live MG MGB Technical BBS is active now.