Welcome to our resource for MG Car Information.
|
MG MGB Technical - hand break light
just had a new master cylinder servo and presure switch ,when i disconect the swith the light goes off yet the breaks are rearly good |
daren |
You need to carefully bleed the brakes to reset the switch, like Paul said before. You bleed one circuit, and the switch moves one way, then you get the person in the car to press the pedal, whilst watching the light, then crack a nipple on the other circuit, and close it off when the light goes off. I've not done this, but it is covered in the Haynes' manual. |
Martin Layton |
This thread was discussed between 09/11/2006 and 10/11/2006
MG MGB Technical index
This thread is from the archive. The Live MG MGB Technical BBS is active now.