MG-Cars.net

Welcome to our resource for MG Car Information.

Recommendations

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG MGB Technical - Help identify brake master cylinder

Guys, have been offered a master cylinder supposedly from an MGB but need confirmtion. It is 3/4 bore tandem and is a lockeed 211/832c. Is this a MGB and if so is it off a non servoed car?
regards
mark
Mark Mathiesen

The dual circuit master used on US cars from 68 to 74 is a 3/4" bore cylinder with a very large round plastic cover. It was not used with a servo. The 75 and later unit was used with a servo and is 7/8" bore and has a hole in the bottom for the brake failure warning switch. See attached picture. (yes I know it's a C but i am using a B pedal box and brake master)


J Heisenfeldt

Guys is there a web site that gives the part number of the differing master cylinders used in MGBs?
regards
mark
Mark Mathiesen

This thread was discussed between 10/04/2008 and 11/04/2008

MG MGB Technical index

This thread is from the archive. The Live MG MGB Technical BBS is active now.