Welcome to our resource for MG Car Information.
|
MG MGB Technical - Rear shock conversion
Hi, I am in the process on doing a rear shock conversion on a 1971 MGB GT. What I need to know is the orientation of the shock mounting plate that bolts to the body. Does the beveled edge face forward or backwards. This is important as it will change the length of the shock. Thanks. Neil.P. |
Neil Peniston |
What make of shock are you fitting? |
John Bilham |
From memory the threaded boss is uppermost. The bevel suggests which way round the bracket goes. |
Allan Reeling |
This thread was discussed between 23/03/2013 and 25/03/2013
MG MGB Technical index
This thread is from the archive. The Live MG MGB Technical BBS is active now.