Welcome to our resource for MG Car Information.
|
MG MGB Technical - Rear Sway Bar Questions
Stock rear sway bar on a '77 mgb roadster. Are there any tips/things I should be aware of when replacing the end link bushings? Are they like tie rod ends that I need to count the number of turns to remove them or take measurments? Any help is appreciated. Mike |
MK Mike K |
They have a locknut like track-rods, but they have no alignment function. No harm in counting turns, but there is no guarantee they haven't been 'adjusted' previously, I would set them so the drop-link is more or less vertical. |
Paul Hunt 2010 |
This thread was discussed on 25/06/2010
MG MGB Technical index
This thread is from the archive. The Live MG MGB Technical BBS is active now.