Welcome to our resource for MG Car Information.
|
MG MGB Technical - Sinking feeling: brakes
I finally got my MoT after much overdue maintenance only to find a weird feel to the brake pedal driving it today. The car brakes fine if you need to stop firmly and quickly but if you apply pressure then ease off a touch the pedal sinks noticeably and the braking effort reduces. Letting the pedal right up or pumping it restores things. I replaced the pads, a couple of brake pipes, a wheel cylinder and rebuilt a caliper for the MoT and of course bled the brakes. I'm thinking master cylinder but may face a divorce if I start pulling the car to pieces in a major way again. Any 2 minute cures? Many thanks, Steve |
Steve Postins |
Sounds like it's master cylinder overhaul time. Bob Thompson |
RHT Thompson |
Yes, have to agree with Bob, Steve. The seals are sealing against the bore with high reverse pressure prssing them on but leaking with less pressure, a bit like you can do with a bike pump. Only other thing springs to mind is the servo if you have one, they can feel a bit like this, are you losing fluid level? |
Rich |
Oh dear. Looks like I need to order a master cylinder and a large bunch of flowers. The car does have a servo but it does it with the engine off, and I don't seem to be losing fluid. Thanks for the confirmation. |
Steve Postins |
This thread was discussed between 30/06/2005 and 01/07/2005
MG MGB Technical index
This thread is from the archive. The Live MG MGB Technical BBS is active now.