Welcome to our resource for MG Car Information.
|
MG MGB Technical - steering wheel
Will a steering wheel from a 1974 1/2 mgb fit my 1979 mgb thank you. You are all so helpfull. |
dbw morris |
It should. I believe the steering shaft diameters are the same. The horn push for the late B is on the end of the turn signal stalk, so that should not be an issue, either. |
Paul K |
I haven't tried this combination so don't know if the shaft diameter, taper and splines are the same size or not. However, the turn signal cancelling cam is mounted on the steering shaft for the 74.5. On the 79 the cam is part of the steering wheel hub. |
Tom Sotomayor |
This thread was discussed between 19/12/2002 and 20/12/2002
MG MGB Technical index
This thread is from the archive. The Live MG MGB Technical BBS is active now.