Welcome to our resource for MG Car Information.
|
MG MGB Technical - Steering Wheel Refinishing
I'm in the process of refurbishing a steering wheel for my 67. It had a few cracks in the rim (none fortunately at the spokes). I am using PC 7 epoxy 2 part putty. It is working well on the deeper cracks, but it does not stick in the smaller chips/scratches. I have been sanding it and have been able to get most of the scratches out. Any hints from those that have done this? What paint is best for this? Was thinking of trying Krylon's new "Fusion" a paint designed for plastics and rubber. Anyone had experience with this? |
Bruce Cunha |
I've used the Fusion paint on some turn signal lights for my old truck. It worked great and it has been on for about 6 months now with no deterioration. I did lightly sand all of the area painted with 400 grit sandpaper first for a good tooth for the paint. I don't know how well the paint will hold up to a lot of handling like a steering wheel. But I'm sold for plastic trim pieces. Cris |
Cris DeYoung |
Bruce - Have you considered one of the leather covers instead of painting the wheel? I put one on the original steering wheel of our 66 MGB and wouldn't go any other way. It makes the wheel a bit thicker and more comfortable, plus it looks great. Cheers - Dave |
David DuBois |
Bruce, I've seen many restored steering wheels painted with automotive paint. With a few coats of clear they tend to hold up very well, or use any single stage paint with hardener added. That would make touch-ups easier. |
Jeff Schlemmer |
Was figuring on putting on the leather Dave. I also like the looks. Figured a coat of black would still be good under it. |
Bruce Cunha |
This thread was discussed on 27/12/2005
MG MGB Technical index
This thread is from the archive. The Live MG MGB Technical BBS is active now.