Welcome to our resource for MG Car Information.
|
MG MGB Technical - test for rebuilt SU fuel pump
Is there a bench test one can perform on a my SU fuel pump which I have just rebuilt? e.g. If I apply power to the pump and while it is pumping if I close of the outlet ( as if the carbs were full) should the pump restart when you open the outlet port? Mine doesnt and this doesnt seam right. Please enlighten me. Thanks in advance for your help. Brian |
B R pasmore |
If it is pumping air and not fuel then blocking off the outlet or the inlet will change the speed of pumping (which will be very fast) but not stop it. If you are pumping fuel in your bench test then yes, it should stop when you block the outlet. |
Paul Hunt |
thanks for your help. u r right it has to be tested with fuel not air . thanks its fixed now . brian |
B R pasmore |
This thread was discussed between 22/04/2003 and 23/04/2003
MG MGB Technical index
This thread is from the archive. The Live MG MGB Technical BBS is active now.