MG-Cars.net

Welcome to our resource for MG Car Information.

Recommendations

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG MGB Technical - Through the Bulkhead

Hi all.

Is there any reason why I should't pass a vacuum gauge pipe or additional wiring through holes in the oversize rubber blanking plug at the top corner of the bulkhead ?.

Does anyone know why these holes are there in the first place ?.

Thanks.. Don
Don

It's for left-hand drive clutch and brake master cylinders. No reason you can't use the hole in my opinion.
Steve Simmons

If you do use it for this purpose, remove it and use a punch to make neat round, correctly sized holes. If you slit it in situ, you'll eventually end up with it torn and leaking.
R. L Carleen

This thread was discussed between 14/06/2004 and 15/06/2004

MG MGB Technical index

This thread is from the archive. The Live MG MGB Technical BBS is active now.