Welcome to our resource for MG Car Information.
|
MG MGB Technical - What's this wire?
In my MGB GT '74.5 I switched to an electronic ignition. In hooking this up I found a white w/ black strip wire from the harness bundled with my alternator wires which I believe went to my old dizzy. It has a connector clip on it but cant find where this goes. Is this ground wire? Or...? Thanks. JOHN |
JW Colson |
White/black around the coil and distributor connects the coil +ve to the points and to the tach. Depending on what electronic ignition you have installed it may well have rendered the connection between the points and coil +ve superfluous i.e. as in the pertronix, but you will still need the wire from the tach to the coil +ve or the tach won't work. |
Paul Hunt |
Yeah I have this wire free since I installed the 123 distributor as well. Everything works so I'm leaving it as is. |
Ross Kelly |
As will I. Thanks, guys! JOHN |
JW Colson |
This thread was discussed between 20/06/2008 and 26/06/2008
MG MGB Technical index
This thread is from the archive. The Live MG MGB Technical BBS is active now.