Welcome to our resource for MG Car Information.
|
MG MGF Technical - air filter
Hi Is it just the back part of the hood which has to be taken off to get at the air filter and plugs on the vvc ??? Cheers Tony |
a h thomas |
Yes, you have to unclip the hood & fold it forward. Remove the carpet and insulation and remove the engine bay cover, 10 screws I think. Rich |
Richard P |
Tony, some instructions here that may be of help: http://www.mgf.ultimatemg.com/group2/DIY/maintenance/ignition/replace_sparkplugs.htm Good luck |
Rob Bell |
Thanks very much again chaps |
a h thomas |
This thread was discussed between 20/07/2005 and 21/07/2005
MG MGF Technical index
This thread is from the archive. The Live MG MGF Technical BBS is active now.