Welcome to our resource for MG Car Information.
|
MG MGF Technical - Bonnet alignment
My new F's bonnet seems a little asymmetrical -it sits a bit lower on the driver's side at the front shut-line. Is this easily remediable? Jack. |
Jack |
you'll find rubber bits near the headlights, on which the bonnet rests. They have a thread and thus, can be turned in order to be adjusted. To make the bonnet sit a bit higher, just turn clockwise the rubber stop. Be careful, because if the bonnet sits too low, it may damage the headlights ... I hope you'll understand my poor english ;o)) Cheers, fabrice |
Fabrice |
This thread was discussed on 16/11/2001
MG MGF Technical index
This thread is from the archive. The Live MG MGF Technical BBS is active now.