Welcome to our resource for MG Car Information.
|
MG MGF Technical - Clutch Master Cylinder
It would appear that the clutch master cylinder has failed. For the sake of £5 worth of seals, (rather than £100 for a new master cylinder),I was going to replace them myself. Does anyone have any experience of doing this job? Cheers, DC |
David Coulthard |
I took both the slave and the master apart on my F recently, it turned out it was the slave which was at fault, water in the clutch fluid = corrosion!! I polished out all the pitting corrosion using micromesh and replaced the seals and fluid, after bleeding the system its been fine since. Give it a try its quite simple really. |
Wayne D |
This thread was discussed between 31/08/2006 and 02/09/2006
MG MGF Technical index
This thread is from the archive. The Live MG MGF Technical BBS is active now.