Welcome to our resource for MG Car Information.
MG MGF Technical - Fitting MGF Foglights
I'm currently collecting all the bits to do a front end TF conversion on my F.
Is the foglight wiring already in situ on the F or will they require hardwiring from relay/fusebox?
|There is an additional wiring loom required for the fog lamp installation Darren. :o)|
|Cheers for the speedy reply Rob!|
Would the loom be an 'off the shelf' jobby or is DIY fix required?
|I would'nt mind an F with foglights if the loom turns out to come ready prepared on a shelf(with the lights of course). This is a longer term aspiration though - got to stop the rot first!|
|Loom should be off the shelf - but probably reasonably easy to put one together yourself...|
Having a look on Dieter's page, there are a number of part numbers listed for the fitting kit - see http://sl.wus0.com/quclk.go?rd=http://www.mgfcar.de/epc/92.htm&res=9&crid=7d12c86e44f3ebf9&pos=2&mr=10&qu=fog
Unfortunately, I am not sure whether the loom is available on its own - do you have some parts available already?
I already have...
Foglights & Mountings
Switch & Relay
New bumper arriving painted next week.
Still need... (Mike Satur)
I'll ask Mike re headlight connector?
|Check out the MGF Register website regarding connectors: http://www.mgcars.org.uk/carclub/mgfregister/archives/articles/F2TF/|
|Just the job Rob - brilliant!|
This thread was discussed between 14/04/2006 and 15/04/2006
MG MGF Technical index
This thread is from the archive. The Live MG MGF Technical BBS is active now.