MG-Cars.net

Welcome to our resource for MG Car Information.

Recommendations

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG MGF Technical - K&N 57i Filters

Not being technically minded (and of the female persuasion), not that they go together I might add!!
Could anyone tell me if these filters are easy to fit to an MGF.

Thanks
J Thomas

All pretty straight forward though you do need to roll around on the floor to fit the cold air induction tubes below the car. I have details on how to gain access to the engine on my website and although I don't go as far as explaining how to fit the K&N my car is fitted with one (a K&N) if you want to take a peek. TBQH, it does not get much harder to fit the filter as it does to get to the engin in the first place - check out my little engine access article, should give you some idea of what you need to do....

http://www.dotcomoff.demon.co.uk

Also home of the F'ers Gallery, MG Dealer Guide and forthcoming MGF Tech FAQ.
Paul Lathwell

Thought it would be a really easy job. I fitted mine without removing boot access cover. Should have read the instructions. Otherwise access is really bad, and it ended up taking me about 2 hours and lots of swearing and grazed knuckles
NATHAN CARNIE

Pretty straight forward to fit filters to an MGF- instructions and some of the filter options are listed on the filter page- url below:

http://ourworld.compuserve.com/homepages/robmidgleybell/filter.htm

HTH

Rob
http://go.to/mgfgallery
Rob Bell

This thread was discussed on 04/09/2000

MG MGF Technical index

This thread is from the archive. The Live MG MGF Technical BBS is active now.