MG-Cars.net

Welcome to our resource for MG Car Information.

Recommendations

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG MGF Technical - mgf front hubs

Is there any difference between front hubs (uprights)on the later mgf's that use the 16" wheels against the earlier ones. I know that the early ones are the same as a Rover 100 (metro) because they don't use a ABS sensor. I need some more for my rally Rover 100.
david

David,
it's all the same from first MGF in 1995 until late y2000.
16' wheels fit to the early MGF (hub) without any problem.

drive flange measures
Centre drill 56,7 mm
PCD 4 / 95,25 mm ((3 3/4")

The axle stub is different between ABS and without ABS, of course.

Except the MGF Trophy drive flange assembly and the young mgtf hub assembly.

HTH
Dieter
Dieter K.

SO WILL THE HUBS FROM A 2004 MGF.TF 135 FIT THE SUSPENSION THE SAME AS I HAVE BEEN OFFERED A PAIR OF THESE FOR MY ROVER (1000) METRO
David

Can't comment about the Metro, but the TF135 hubs and uprights will be a direct swap with any MGF.
Rob Bell

This thread was discussed between 15/03/2005 and 16/03/2005

MG MGF Technical index

This thread is from the archive. The Live MG MGF Technical BBS is active now.