Welcome to our resource for MG Car Information.
|
MG MGF Technical - Revs & Throttle Body
Fitted a 52mm alloy throttle body today. However when coming to a stop the revs stay briefly at 1500rpm and then drop to 1000rpm for a few seconds before dropping down to tick over revs. What have I missed or gone wrong with the installation, other than that the throttle body works as advertised in conjunction with a K&Ni filter. Any ideas would be appreciated. |
James Forbes Simpson |
have you done a 'tps' reset Switch on ignition (red lights, not running engine) Press and release the accelerator fully 5 times Switch off now try again - good luck! |
Will Munns |
Thanks Will. Now all OK |
James Forbes Simpson |
This thread was discussed between 11/09/2004 and 12/09/2004
MG MGF Technical index
This thread is from the archive. The Live MG MGF Technical BBS is active now.