MG-Cars.net

Welcome to our resource for MG Car Information.

Recommendations

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG TD TF 1500 - Bumpers....

Hi again, I have everything I have been told I need to mount my nicely chromed bumpers... I haven't however found any good information as to where I need to put all the bushings? Anyone have a diagram?
There seems to be so many.

Richard.

PS... we needed a new fuel pump so never got to start it up last weekend. It's somewhere lost in transit.

I swear I will drive her this summer........... but we will miss the rally in the valley in Kelowna this year.

http://www.obcc.ca/ritv.htm

maybe next year.
R & A Budd

R&A,

Front or rear? or both?

Gord Clark
Rockburn, Qué.
Gordon A. Clark

Both,,, just a starting point. Do I need 2 spacer kits (10 pieces) or just 1 5 on each end?
R & A Budd

I'm at a show tomorrow... will take a photo from underneath showing how mine are all spaced.
gordon lawson - TD 27667

Well.. got a shot of the rear one anyway...

http://www.niagarabritishcarclub.org/otr/rbump.jpg
gordon lawson - TD 27667

The flat vertical bar is the "back up light bracket"?
So from the front it is: nut/small washer(?), washer, (my back up bracket), bumper bracket/spacer/rear apron.
gordon lawson - TD 27667

Thank you all.. I see that there is a lot of spring in putting these together. My black bar need quite a bit of bending to be able to fit to the form of the bumper.

Again Thanks

R & A Budd

This thread was discussed between 02/07/2005 and 19/07/2005

MG TD TF 1500 index

This thread is from the archive. The Live MG TD TF 1500 BBS is active now.