MG-Cars.net

Welcome to our resource for MG Car Information.

Recommendations

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG TD TF 1500 - Floor cover and brake bolt

I got the floors in today. Step by Step, the car is coming along.

I have a new cover for the master cylinder hole in the floor. It came with two round head screws, but the floor has two 1/4 inch holes that go all the way through on either side of the filler hole.

What fasteners were used for the cover plate?

Also, there is a fixed bolt hole on the back inner side of the brake/clutch pedal box. The thick rubber pad that goes over the box has a corresponding hole, but there is no hole in the floorboard. Should there be a hole in the floor?






Bruce Cunha

There are 2 bolts 1/4”, well screws that go into the pad, under the floorboard.

One up front, one in the back.

Peter
P G Gilvarry

Well Screws? Not familiar with that term. would you have a picture.
Bruce Cunha

Well, they are technically a screw, countersunk head 1/4” BSF
P G Gilvarry

So like the floorboard screws, but shorter? My kit came with a number of those.
Bruce Cunha

This thread was discussed on 22/11/2021

MG TD TF 1500 index

This thread is from the archive. The Live MG TD TF 1500 BBS is active now.