Welcome to our resource for MG Car Information.
MG TD TF 1500 - grease nipple replacement
I have need to replace a few of the grease nipples found on my '54 mgtf. Going to the web-site of British Tools & Fasteners, they have two types listed: BSP 1/8" and BSF 1/4". Am I correct in assuming I would order the BSF 1/4"? I contacted Jon Caswell of BT&F and he did not know the answer. Hopefully, this will be a simple "yes" or "no" answer. Cheers -- John |
John Brickell |
I got some at NAPA that fit just fine for my '50 TD believe it or not! You might check there first. Just take an old one with you to match. |
efh Ed |
The correct term is zerk fitting. But nipples are my choice. |
Len Fanelli |
Clever Len, and certainly my choice too, but do you have an answer to my query..... Cheers -- John |
John Brickell |
This thread was discussed between 28/08/2009 and 29/08/2009
MG TD TF 1500 index
This thread is from the archive. The Live MG TD TF 1500 BBS is active now.