Welcome to our resource for MG Car Information.
MG TD TF 1500 - Gunson Clik-Adjust Tool
Has anyone used the gunson Clik-Adjust tool to set the valve clearances on an XPAG or XPEG? If so, what number of clicks are involved with the two different settings (012 or 019) used on our TDs? |
Jim Merz |
Jim - I have and use the Click-Adjust on my TD and MGB and have found it makes adjusting the valves quite straight forward. Unfortunately, I have only written down the number of clicks for the MGB at .015", but it is really quite easy to determine the number of clicks required for any clearance, and is well written up on the package. At this web site http://www.mgcars.org.uk/MG_Elec-Tech/Clikadjust_0.html, there is a method for determining the number of clicks, but I find the one on the Click-Adjust package to be much more straight forward and it only takes a few minutes to do it, in case, like me, you forget to write it down. Good luck - Dave |
David DuBois |
This thread was discussed between 12/08/2001 and 13/08/2001
MG TD TF 1500 index
This thread is from the archive. The Live MG TD TF 1500 BBS is active now.