MG-Cars.com
MG TD TF 1500 It's... FRONT END FRIDAY!!!! BBS discussion at MG-Cars.net
MG-Cars.net
Welcome to our resource for MG Car Information.
Recommendations
Parts
MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.
MG TD TF 1500 - It's... FRONT END FRIDAY!!!!
| I'll show you mine if you'll show me yours. .....  |
| MAndrus |
| OK I will play. How did you get three badges to fit. Joe  |
| JWP Policastro |
| M, Under the unfortunate prevailing circumstances up here in New England, this is the best I can do!!!!  |
| Steve Wincze |
Darn... groupies always in the shot!
 |
| David Sheward 55 TF1500 # 7427 |
| I DO BELIEVE THAT WE HAVE A WINNER !!!!!!!!!!!!!!!!!! |
| Steve Wincze |
| I can't top that, but I'm in. -David  |
| D. Sander |
Another |
| D. Sander |
| Ok, one more Leaving the car display at the Middlebury, Vermont GOF this past. June  |
| D. Sander |
| M, I'm fascinated with your badge bar. As you can see from the attached photo of my grill, I do not have a badge bar but I'm thinking of getting or making one. My car has some holes beside the grill and in the splash pan that suggest that it may have once had a badge bar similar to yours. Where did yours come from? Do you know if your type is still available from anywhere? Thanks. Jud ps: I'm in northern Greenville County, SC. What part of NC are you in?  |
| J K Chapin |
Gone but not forgotten.
 |
| MG LaVerne |
| Dave Sheward gets the prize! George |
| George Butz |
Here is my late 1952.
 |
| AC Davis |
How's this?
 |
| MG LaVerne |
I'm in |
| Christopher Couper |
Not up to Davids standards, but it will have to do. :-)
 |
| MG LaVerne |
Ok I'm done.
 |
| MG LaVerne |
A work in progress
 |
| L Karpman |
| The badge bar on the TD is just a piece of steel pipe, with each end flattened in a vise and held by an apron screw on each side. Frank Churchill made it and installed it in 1955. When I restored the car, I spent a great deal of time restoring this badge bar. The bottom of it still has the marks from the jaws of the vise. -David. |
| D. Sander |
Ok, one more. Here is TC10018, believed to be the last TC sold new. The car was a birthday gift for the woman in the picture.
 |
| D. Sander |
how about some mascots?
 |
| mog |
TC 10018 EXU as she looks today.
 |
| D. Sander |
| Away for a long winters nap Jim B.  |
| JA Benjamin |
| Another of Midge and her stable mate. ('34 ford hot rod, completed in October) ...  |
| MAndrus |
| JK, here's a few pics. It came on the car, no idea... but it's mounted back far enough so I can add another at the bumper mounts and add 2 smaller fogs and more badges, of course. .....  |
| MAndrus |
| JK, I'm 8 miles from Asheville airport using airport transfers tunbridge wells. Another pic: ....  |
| MAndrus |
The view is somewhat unavailable at this time. Bud
 |
| Bud Krueger |
one more........
 |
| David Sheward 55 TF1500 # 7427 |
| Bud, we feel your pain. .. |
| MAndrus |
Pretty obvious "who" is getting driven lately........
 |
| David Sheward 55 TF1500 # 7427 |
| Looks like it does MOST Fridays! (Gearbox on stand over LHD fender) Lonnie TF7211  |
| LM Cook |
| Only one badge; the Norwegian motor sports club, Oslo branch. Only this one badge as it is super rare and deserves to stand alone. But it won't win this Fridays contest! Regards Jan  |
| Jan Emil Kristoffersen |
| I managed to put a couple on front. Two more on License plate on rear Don H  |
| Don Harmer |
| LaVerne, looking at your photo I couldn't help singing to myself... ♫♪♫ "I like big buttes and I cannot lie... you other brothers can't deny..." ♫♪♫ --------- Mine in warmer days... there's since been a "Whitworth Nuts" badge added.  |
| kmclemore |
Better late than never.
 |
| Jack Long |
| TD3966 Jasper  |
| JL Nederhoed TD3966 |
| Sharing the frame with another front end. BobbyG  |
| Bobby Galvez |
| I have one badge (MGRA) & a badge bar, yet to be fitted. However I'm really impressed with the number of owners who have taken the time to straighten the radiator slats! I spent countless hours with a hammer & dolly & a home made plywood tool bending & aligning the slats, eliminating birds strikes & minor dings, so I know the amount of effort involved. Cheers Peter TD 5801 |
| P Hehir |
| Ok, I´m late... Mike  |
| Mike Fritsch |
| Behind the shroud it´s a bit more modest... Mike  |
| Mike Fritsch |
The best I can do from Mexico.
 |
| Dave Braun |
| A Saturday addition. My TF  |
| T Norby |
After a night of heavy drinking. (the car, not me)
 |
| Steve S |
If I could get in, here's what I'd see. (BTW, it's snowing again). Bud
 |
| Bud Krueger |
Taken the day of arrival...
 |
| Charlie Adams |
This thread was discussed between 20/02/2015 and 22/02/2015
MG TD TF 1500 index
This thread is from the archive. The Live MG TD TF 1500 BBS is active now.