MG-Cars.net

Welcome to our resource for MG Car Information.

Recommendations

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG TD TF 1500 - M/C sleeve dimensions

Need to re-sleeve the master cylinder for my TF.

Can anybody advise the recommended sleeve dimensions.

Also a source for the material (prefer brass).

Thanks.

Gord Clark
Rockburn, Qu.
Gord Clark

Gord,
Sleeving a cylinder is easy, the big problem would be drilling the tiny, and I mean TINY recuperation
hole and making sure there was no sharp edge.
Ray TF 2884
Ray Lee

Gord,
The bore is 7/8" so you would need brass tubing with that ID. I agree with Ray that the hole might be tricky. I would drill it undersize and then ream to the final dimension. That will remove the burrs. That is how I drill the dials on my clocks and gauges. It works a treat.
Regards
Declan
Declan Burns

I forgot to say there are two holes, the larger hole is no problem. The smaller is a pig, I had to scrap a cylinder after the drill snapped and stuck in the body.
Ray
Ray Lee

Ray,
Can happen all to easily. I know the story. I would certainly use brand new bits.
Regards
Declan
Declan Burns

HI Declan, this was before the days of magic things call Dremel.I think the drill was 1/32"
I was using a hand spinner and got too enthusiastic.
Ray
Ray Lee

This thread was discussed on 11/07/2022

MG TD TF 1500 index

This thread is from the archive. The Live MG TD TF 1500 BBS is active now.