MG-Cars.net

Welcome to our resource for MG Car Information.

Recommendations

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG TD TF 1500 - Master Cylinder Inspection Plate

They say that a day you don't learn something is a wasted day. Well today was not wasted.

I was updating my TD fastener list and trying to figure out what length the screws or bolts that hold the master cylinder inspection plate to the floorboard is.

I looked on the various sites and did find the plate, but not the screws/bolts. I sent Chris Cooper an Email and he sent me a picture from the TD shop manal

https://mail.google.com/mail/u/0?ui=2&ik=1b7820d2c1&attid=0.1&permmsgid=msg-a:r-2762682892437680635&th=16f01e2a80c762fc&view=att&disp=safe&realattid=16f017425aec36455a91


In that picture it is unclear if this is a 2BA machine screw that goes into a T nut or if it is simply a round head slotted screw that screws into the floorboard.

But here is what I learned.

The plate is the same as used on the TA through the TF.

Left Hand Drive TD's had the plate prior to car 4237. This was the introduction of the cutout in the LHD TD floor and a rubber plug was used.

All Right Hand Drive Cars had the inspection plate. I am assuming that this is because they did not have the foot well due to the location of the exhaust down tube.

If anyone can clarify if the cover goes on with a machine screw or a wood screw and what the top looked like, I would appreciate that information.


Bruce Cunha

Just slotted wood screws on my TF 1500.


M Magilton

Matthew: What screws/washers are holding down your pedal excluder?

I thought those were also the same round headed wood screws with no washers as the plate.
Christopher Couper

Bruce,

On RHD TFs, originally the Master Cylinder Inspection Plate was affixed to the floorboard with two(2) screws going into T nuts ie. they are not just wood screws.

Cheers
Rob Grantham
TF3719("Aramis"),TF9177(Athos").
Rob Grantham

Sorry guys, my bad. I went and checked, yes they are T nuts.
Chris, no washers, just little circles of dust.
M Magilton

Rob. Round head slotted?
Bruce Cunha

Matthew: T nuts and round headed machine screws for the excluder too or they wood screws?
Christopher Couper

Bruce,

From memory, round (small) head slotted into T nuts for the Master Cylinder inspection Plate.

Around excluder with affixing plate, wood screws.

Cheers
Rob Grantham
Rob Grantham

Thanks Rob.
Christopher Couper

Yes, wood screws for the excluder.
M Magilton

And one 1/4 bsf

Pedal Excluder 5 Round Slot Wood 5/8 Cad

Pedal Excluder 1 Flat Slot 1/4 BSF 1 1/2 Cad FB Cap Through pedal box rubber and into pedal box at right front of excluder
William Revit

William: Yep. Thanks for the clarification on that one that goes into the pedal box.
Christopher Couper

Definitely 2 BA machine screws into T nuts. See Pic. Can't confirm the head type though. Cheers
Peter TD 5801


P Hehir

This thread was discussed between 14/12/2019 and 28/12/2019

MG TD TF 1500 index

This thread is from the archive. The Live MG TD TF 1500 BBS is active now.