Welcome to our resource for MG Car Information.
MG TD TF 1500 - Need Male Fitting for TF Fuel Line
A friend installed a fuel line for an early TF (firewall mounted fuel pump) onto his TF with a rear chassis mounted pump. The engine end of the line has a female fitting. The engine end of a newer TF line requires a male fitting like the photo. The car is fully assembled.
I can't find a source for a male BSP fitting to replace the female, or a BSP nipple to change the female fitting to a male fitting. In addition to replacing the line, what suggestions do you have to fix the problem? Thanks, Lonnie TF7211 |
LM Cook |
That's the same fitting I have on my 55TF 8353. I don't know of a conversion fitting. Also my fitting is mounted half as high as the one shown, looks like it would interfere with the bonnet. PJ |
PJ Jennings |
Lonnie. Check MGBITS.Com. I see they have female end fuel lines and also sell a male to male adapter. http://www.mgbits.com/contents/en-uk/p2022_Union-Fuel-Pipe-Joint.html |
Bruce Cunha |
Thanks Bruce. That’s what he needs. I heard today that he may have ordered a similar fitting from Moss. Lonnie TF7211 |
LM Cook |
Or Joe Curto joecurto@aol.com 718 762 SUSU Len |
Len Fanelli |
This thread was discussed between 31/03/2021 and 01/04/2021
MG TD TF 1500 index
This thread is from the archive. The Live MG TD TF 1500 BBS is active now.