Welcome to our resource for MG Car Information.
MG TD TF 1500 - New Master cylinder
Hi, what is the difference between new master cyl 180-730 and new master cyl (replacement) 181-195. Is it just originality or is there a fundamental, ie is it a direct replacement. Ray TF 2884 |
Ray Lee |
I should have said "in the Moss catalogue" Ray |
Ray Lee |
Hi Ray I can't find either of the part numbers, but I have just been through the same search. The replacement has a different filler cap and has no markings as far as I could see from pictures as to who made it. I assume it is a chinese copy. Having been through similar problems on my MGA I can say that copies are not worth it. I bought an new AP Caparo master cylinder for my TD which is as near to original as possible. I purchased from Classic Automobile Electrical in Linconshire it was £105 which is very competetive with the non original. The way I figure is that without dual circuit brakes you have to rely on a quality brake system. Just my opinion. Barry |
B Bridgens |
Should have said I was using Moss USA catalogue numbers as most members are American. For some reason Moss Europe use different numbers. Ray |
Ray Lee |
Ray, You would be better off buying a TRW or AP cylinder. they come up on ebay frequently, for example: http://www.ebay.com/itm/MG-TD-TF-BRAKE-MASTER-CYLINDER-NEW-TRW-/201135451004?pt=Motors_Car_Truck_Parts_Accessories&hash=item2ed49b6b7c&vxp=mtr With postage, it works out a little more expensive, but is worth the difference. Have you tried honning your old one? John |
J Scragg |
I had mine fitted with a Stainless Steel sleeve worked out a lot less expensive. Regards |
G Mills |
I would be concerned about the interchangeability of internal repair parts when that becomes necessary. |
Jim Merz |
For one thing - as I found out, the replacement Original does not have a repair kit available. Whats up with that? $269.95 MASTER CYLINDER, brake Delphi-Lockheed- you would think you could buy a new set of rubbers Ect. It just says NA REPAIR KIT, master cylinder Delphi-Lockheed cyls. Rod. |
Rod Jones |
I had my TD master cylinder resleeved with stainless steel by Mark Frappier. About $80 including return shipping. His work looks excellent. Mark Frappier 80 Mountainview Street Agawam, MA 01001 800-528-5235 Charlie |
Charlie Adams |
Hi Here in Europe/UK I tried to find someone to resleeve my old cylinder. The cost plus new rubbers was virtually the same as the new AP Caparo cylinder. So I went new. Barry |
B Bridgens |
This thread was discussed between 27/10/2014 and 30/10/2014
MG TD TF 1500 index
This thread is from the archive. The Live MG TD TF 1500 BBS is active now.