Welcome to our resource for MG Car Information.
MG TD TF 1500 - Rear suspension
What other cars have the same rear suspension bushings as the TD?. I know the front will take MGB,and the rear upper and lower spring pad can be used from the spriget, but what about the rear bushings. I want to do poly on these. Moss has some poly, but not ones I prefer. |
Bruce Cunha |
Spring pads are same as Spridget, certainly for the TF, I believe TD is the same. Abingdon also has 19-093A for rear end of springs, don't see any for front end of the leaf spring. Good luck with your search. Peter |
P G Gilvarry |
The TD will take the same shackle bushes as the midget I think Bruce as thats what went on this 50 based on the package I was given but you might want to call Moss and confirm that. |
L E D LaVerne |
The TD rear shackle poly bushes I am making are turning out quite nice. You need to check the dimensions of the Moss Midget bushes. I am not convinced they are suitable for the TD as they look too short. I used the dimensions given on here and cross checked the dimensions with bushes from a different supplier. Regards Declan |
Declan Burns |
Photo of the bush. I have been experimenting with the shore grade. When I am finished testing they will be done in black or indian red. They take about a week to fully cure. The one in the photo cured @ 75° shore. Regards Declan |
Declan Burns |
If it is of any help i got the following pieces from John James ( jj@octagon.fsbusiness.co.uk )
For the front suspension, lower wishbone bush kits For the rear suspension eight polyurethane bushes For the rear springs: 24 Nylatron spring pads 4 polyurethane spring ‘saddles’ 8 polyurethane angle ‘clips’ |
Robert Weinstein |
Thanks Robert. I dropped John an email. Declan. Any estimate on when you will have a black ones available? |
Bruce Cunha |
Bruce, I am making a mould so I can cast all 8 shackle bushes at once as opposed to the single mould I have at the moment. I would think I will have it finished in about two weeks. It is too cold here to be doing anything else at the moment. Regards Declan |
Declan Burns |
Robert. Do you have a shop name for them? The email bounced. |
Bruce Cunha |
Bruce, The address looks good to me. I also had an email to John James bounce as undeliverable but when I tried again the next day it worked. I have no explanation. I got the same parts as Robert and was very happy with them. Regards, Michael |
M R Calvert |
I found out John James has a new email. That was why it was bouncing. Here is his new one. jj@ttypes.org I sent him the list of the suspension parts. Thanks for the lead on these. |
Bruce Cunha |
Thanks Bruce. Address book corrected. Regards, Michael |
M R Calvert |
This thread was discussed between 25/02/2018 and 28/02/2018
MG TD TF 1500 index
This thread is from the archive. The Live MG TD TF 1500 BBS is active now.