Welcome to our resource for MG Car Information.
MG TD TF 1500 - TF Front Hub Installation
I have purchased new wire wheels and new splined hubs for my TF to replace the original wire wheels. Changing out the hubs on the rear axle was simple, however I have a concern about replacing the front hubs. The W S Manual has a statement about pressing the hub assembly (inner bearing fitted into hub) onto the stub shaft. There is no reference to the fit between the inner bearing and stub shaft. I assume it is a press fit. I am seeking advice on how to press the hub into position on the stub shaft 1955 mgtf 1500 9194 |
I Massey |
Use the big nut to pull it on. |
George Butz |
This thread was discussed on 15/02/2016
MG TD TF 1500 index
This thread is from the archive. The Live MG TD TF 1500 BBS is active now.