Welcome to our resource for MG Car Information.
MG TD TF 1500 - TF wheel cylinders
My wheel cylinders are due for a change out , can anyone give me a heads up on the best ones to buy and who from, Moss USA seem to be the best price. Regards George |
G Mills |
George, I have Moss cylinders on mine and no issues. I also use silicone fluid in the system, but nothing wrong with the old type. PJ |
Paul161 |
Thanks mate. |
G Mills |
George you have mail. Cheers Peter TD 5801 |
P Hehir |
Hi George, Some time ago,I had my original Brake Wheel Cylinders sleeved at Perth Brake Parts. They used Stainless Steel. No problems,however not a cheap exercise ! I run them with Silicone Brake Fluid,again no leaks and no problems at all. I have heard comment that the new repro. brake cylinder internal components are not a suited match to the originals? Brakes are important,so no compromise allowed. Cheers. Rob Grantham TF3719("Aramis"),TF9177("Athos"). |
R GRANTHAM |
+ 1 for Stainless sleeves. Matthew. |
M Magilton |
George, I had my wheel cylinders and master cylinder sleeved in stainless steel by Halray Brake Reconditioning in South Lismore NSW. I was very happy with the service provided, (Dec 2013). They were good people to deal with. Michael |
M R Calvert |
I replaced mine with cylinders from Moss. Lucas on the back and Aftermarket on the front. The Aftermarket front cylinders are good quality so I suggest aftermarket on each corner to save on cost mgtf 1500 9194 |
I Massey |
I also had my master cylinder and my wheel cy;inders stainless steel sleeved on both my MGB and my TD. The MgB had the sleeves put in more than ten years ago now with no problems whatsoever. John...Sydney |
John Walton |
This thread was discussed between 01/03/2016 and 04/03/2016
MG TD TF 1500 index
This thread is from the archive. The Live MG TD TF 1500 BBS is active now.