Welcome to our resource for MG Car Information.
Triumph TR3 - Broken push rod fork locating pin
Does someone has experience with removing of a broken clutch push rod fork locating pin?
To see my foto's copy the next link into your browser.
|Wim - If you mean the tapered pin that secures the yoke (fork) to the clutch cross shaft, you can drill down through the yoke (fork) from the top with a drill about 1/8" (4mm) diameter and drive it out from the top.|
Check it all here : -
Save this site because it's hard to find again.
Don Elliott,1958 TR3A
|Don, thanks for your comment, verry useful site!|
Kind Regards, Wim.
This thread was discussed between 24/07/2006 and 25/07/2006
Triumph TR3 index