Welcome to our resource for MG Car Information.
|
Triumph TR6 - Toe In: Rear wheels
Should there be any toe in on the rear wheels. I can adjust them easily with the swing arm suspension shims but I'm just not sure if the wheels should be canted inward toward the front or not. And if so, to what degree? Thanks BC |
Bryn |
Bryn, The Bently Book suggests "rearwheel toe-in should be within 1/16 in (0 to 1.58 mm)". Camber is +1 to -1/4. SC (member) |
Steve C |
This thread was discussed between 05/07/2003 and 06/07/2003
Triumph TR6 index